5 Operation
97
5.3 Inserting the milling cutter or diamond grinder
Note
Only use carbide cutters or diamond grinders that comply with EN ISO
1797-1 type 3, are made of steel or hard metal and meet the following cri‐
teria:
- Shaft diameter: 1.59 to 1.60 mm
- Blade diameter: max. 2 mm
MT02 B42 and MT02 B44:
- Overall length: max. 25 mm
- Shaft clamping length: at least 11 mm
MT02 Mini B14:
- Overall length: max. 21 mm