Installation And Wiring; Unpacking; Installation - Chauvin Arnoux CA 650 Notice De Fonctionnement

2. Installation and wiring

2.1.

Unpacking

If any damage is found while unpacking, the user should contact the local
representative at once. It is suggested that the special packaging is retained for
possible future requirement.
2.2.

Installation

Remove stains from this equipment using a soft, dry cloth. Don't use harsh
chemicals, volatile solvent such as thinner or strong detergents to clean the
equipment in order to avoid deformation.
The recorder is designed for indoor use and not in any hazardous area. It should be
kept away from shock, vibration, and electromagnetic fields such as variable frequency
drives, motors and transformers.
It is intended to be operated in the following environment:
Pollution Degree Level II
Temperature
Humidity
Power
IEC1010-1( EN61010-1 )
5 ~ 50
20 ~ 80 % RH ( non-condensing )
90 ~ 250 VAC, 50/60 Hz
11-18 VDC or 18 - 36 VDC
Panel mounting style
Figure 2 – 1
60
Û&
:
The front side