Clear; Operate; Shutdown; Small Icons (On The Top Right Side ) - Chauvin Arnoux CA 650 Notice De Fonctionnement

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.8.

Clear

If the internal memory goes down to 25%, the mem icon on the top right changes color
from green to red. Also, when the internal memory reserved for events is down to 25 %,
the evnt ( event ) icon on the top right changes color from green to red. In each case
the user should transfer all the measured data from the recorder to CF card by pressing
Dump key as above. However, if the measured data and events are not significant
information, the user may also press Clear key to clear them.
3.9.

Operate

Press Operate key to
selecting Log alarm. There are various jobs that may be assigned, as described in
Event, Job of 4.1 Channel.
Details about soft key Config are described in 4. Configuration.

3.10. Shutdown

Accidental turning off the power will cause loss of data and will interrupt the operation of
the recorder. Therefore press the Shutdown key to shutdown the system first before
turning off the power.
Small icons
3.11.
Buzzer: Appears by flashing in red whenever the alarm status occurs. The buzzer will
disappear after the user acknowledges the alarm, or the process becomes normal.
Evnt: The percentage of memory space left for events/alarms. For example, evnt 84%
means 84% space left for events/alarms. Refer to Event/Alarm Limit in 4.4 Instrument.
Various numbers of events/alarms can be set. The icon flashes red when memory
space is down to 25 %. The icon returns to normal green after pressing the soft key,
either Dump or Clear.
mem: It is the percentage of memory space left for measured data. The icon starts
flashing red when the memory space is down to 25%. The icon becomes normal green
after press soft key either Dump or Clear. If the internal memory goes down to 10
%, the earliest measured data and events will be saved to CF card in small batch
automatically. If there is no CF card inserted, then the earliest measured data and
events will be overwritten and replaced by the latest measured data and events.
start a job manually. For example: to record the alarm by
(on the top right side ):
Figure 3 – 6
76

Publicité

Chapitres

Table des Matières
loading

Table des Matières