Channel - Chauvin Arnoux CA 650 Notice De Fonctionnement

Save: Save configurations from recorder to storage media CF card. To read the
configuration and measured data from CF card on a PC for the first time or any
time configuration has been changed, it is important to press Save key to save
configuration changes to CF card beforehand.
Load: Load configuration from storage media CF card to recorder.
Default: If the configuration is set incorrectly, Default is a useful key to recall the
default settings on the analog input card inserted into rear expansion slot.
Back: Go back to the previous display.
4.1.

Channel

After entering the Configuration mode, select Channel and press the Enter key to get
into Channel mode. It displays the Analog input first. Press directional keys• •at the
bottom to select the channel. Afterwards, press directional keys••• • on the left hand
side to select the column. After Configuration 4.1 to 4.8, press Back key to return
to real-time display, all configurations will be memorized.
Figure 4 – 2
Name: It is to define the name for each channel in maximum 6 characters. Press
Enter, a keyboard and several keys appear. BackSP key means backspace, Select
key means to select a character or number, Caps on means characters in capital, and
Caps off means characters not in capital.
78