Chauvin Arnoux CA 650 Notice De Fonctionnement page 87

Totalizer
Figure 4 – 8
Press directional keys• •at the bottom to select from 18 available totalizers.
Name: Defines the name of the totalizer.
Desc: Defines the description for a specific totalizer on the display.
Source: Select a specific analog input or Math input to be used for totalizing.
Action: Disables or enables the totalizer.
Decimal: Defines the decimal point for the totalizer.
Period: Selects second, minute or hour used for the totalizer.
Unit: Defines the unit of totalizing
Preset: Defines the preset value for the totalizer. The totalizer starts from a preset
value.
Event: Defines the type, setpoint, Job1 or Job2.
Type: Select one of three options: None, Process Hi, Process Low
Setpoint: Defines the set point of process value to trigger the totalizer.
Job1, Job2: various jobs as described in 4.1 Channel, 2 jobs for each totalizer.
An example of Totalizer: A factory operates for 8 hours a day, and the staff wish to get
the total volume of production from daily, weekly and monthly reports. First, the user
needs to enter into Tools mode, do the settings as follows, then totalizer starts to work
from 8:30 am, and stops at 17:30 pm daily. After production has finished, the user does
the following: press Event key on the left hand side, and press Mode key to select
Report mode. Finally, press Report key to choose daily, weekly or monthly report.
87