Setup Input, Output & 24Vdc Power Supply Cards - Chauvin Arnoux CA 650 Notice De Fonctionnement

Note:
‹
To change the bench top into panel mount. Disassemble kit MK184 (one handle,
two feet, and two ears) in reverse of above, then fit the mounting clamps.
2.3. Setup input, output & 24VDC power supply cards
Analog input cards ( part numbers AI183 )
AI183 are analog input cards in 1, 2, 3 channels respectively. Each card includes
universal input of TC ( J, K, T, E, B, R, S, N, L ), PT100, mV, mA, V. To select a
specific input, first set jumpers and switches according to the sticker information on the
card as Figure 2–15, and plug it into the rear slot then power on. The recorder will
automatically detect the card and display the specific input type, then show its source of
a specific slot in Configuration Mode. All inputs were initially set for 4-20mA from the
factory.
Figure 2 – 13
Figure 2 – 14
65