Installer Menu - Dantherm CDF 40 Manuel D'entretien

EN

Installer menu

Fan set point.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Press to confirm.
Service interval
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Press to confirm.
38
Press and hold for 5 seconds to enter installer menu.
When the extractor fan icon flashes at 0.5 Hz and extractor fan set point value is shown on info line.
Left or right button to decrease or inrease value. Enter to confirm set point and go to next icon.
If you do not confirm change, the new setpoint will not be stored
While flashing, the service interval can be increased by pressing RIGHT Button or decreased by
pressing the LEFT Button.
Maximum 99 Weeks. Minimum is 1 week.