Data Memory Interval Time - RS Pro RS-660 Manuel D'instructions

In the Timers mode, press
to review the Start-time and Duration-time, press
times. If you will change the data, using
time element to adjust then using
element value including the Repeat number from 01 to 99 and the "Enable"
or "Disable" selected. Press

8-10 Data Memory Interval Time

The LAVG, LEQ, LCPK and LZPK time-history data is saved at an data
memory interval time for every run and are available following download.
Data memory interval time can be set by press
press key to review. Press
ey to select 1, 5, 10 or 30 minute, 1 or 2 hours and press
k
05/24/18 Version No. 00
( key)
key)
(
Logging Personal Noise Dosimeter / EN
key to select "Repetitive" then press
key to position the cursor to the
, keys to setting the selected time
key to confirm then press
( key)
key to select "Interval" then
key to accept or press
key to review the Repeat
key to exit.
key)
(
key)
(
key then press
key to confirm.
key
27