RS Pro RS-660 Manuel D'instructions page 28

Logging Personal Noise Dosimeter / EN
To select no-cycle timer run by press
key to enter this mode. Press
to review the Start time, press
change the Duration time and the Start time, using
cursor on the date or time element to adjust then using
the selected date or time element value including the "Enable" or "Disable"
selected. Press
8-9-2 Auto-Cycle Timer Run
The auto-cycle timer run means the start-time and the duration-time is valid
at the repeat setting number from 1 to 99 times.
(
(
(
26
key to confirm then press
key)
key)
key)
key to select "Timers" then press
key to select "Delayed" then press
the key to review the Duration time. If you will
( key)
key to position the
, keys to setting
key to exit.
( key)
( key)
05/24/18 Version No. 00
key