The Mounting Clips - RS Pro RS-660 Manuel D'instructions

Logging Personal Noise Dosimeter / EN

5-3 The Mounting Clips

Upon delivery, the meter will be fitted with the Crocodile-style mounting clips on
flexible webbing to aid positioning as they can be fitted to virtually any clothing
type. The mounting clip is used for attaching the meter to clothing and should be
used where piercing the employees clothing is not desired.
The recommended location for mounting a personal noise exposure meter in a
position close to the ear (10 – 15 cm). The meter should therefore be mounted on
the apex of the shoulder to avoid reflections from the head which might otherwise
affect the measurements. Consult your local Legislation and Standards for more
information.
All mounting clips are attached the meter by two screws. By removing the screws
with the screwdriver the mounting clips can be changed.
8 05/24/18 Version No. 00