Selecting Dosimeter Setups - RS Pro RS-660 Manuel D'instructions

Logging Personal Noise Dosimeter / EN

8-4 Selecting Dosimeter Setups

The meter has up to 3 simultaneous dosimeters, Dosimeter-1 Dosimeter-2 and
Dosimeter-3 which only determine what is displayed on screen and not, but all is
calculated and saved to memory for later download and analysis. The
Dosimeter-1 cannot be disabled. Additional Dosimeter-2 and Dosimeter-3 may be
selected to display any of the other available configurations.
The meter can be configured to display any one of ten built-in (predefined) default
setups (OSHA-80, OSHA-90, MSHA-80, MSHA-90, DOD, ACGIH, ISO-85,
ISO-90, NR-15 and NHO-01) or any one of nine full custom configurable from
USER-1 to USER-9.
The Dose dates and Noise parameters available for display on screen and is
achieved using the meter CD software by PC.
8-4-1 Pre-difined Dosimeter Setups
20
( key)
 (
key)
( key)
 (
key)
( key)
( key)
05/24/18 Version No. 00