Linking Chargers Together; Battery - RS Pro RS-660 Manuel D'instructions

6-2 Linking Chargers Together

The charger can be linked to the another charger via the link cable and the
charger link plate. Up to 4 chargers can be linked.

6-3 Battery

The meter battery care best practices.
The meter incorporates a Lithium Polymer battery as a power source that with
proper care should give years of operational service. (Three years is typical)
Proper care includes these best practices.
●
After use, it is best to charge the meter using the recommended charger prior
to storage for a prolonged period. A prolonged period is considered to be 2 or
more months. If the meter is to be stored for an even longer period, it is best
to take the meter out of storage and re-charge the meter every 2 – 3 months.
●
Charge the meter in the recommended charger before attempting to turn it on
if the meter has not been used for a prolonged period or was stored in a low
battery condition.
●
It is best not to store the meter for any period of time in low battery condition.
●
If not using the meter it is best to keep the meter in a powered up the
recommended charger.
05/24/18 Version No. 00
Logging Personal Noise Dosimeter / EN
11