Fl Ue Damper Operation - Napoleon High Country 7000 Mode D'emploi

installation planning
EN
3.3.3 fl ue damper operation
To close the damper, pull the damper control rod down and
push it to the right.
To open the damper, push the damper control rod to the left
side and release.
note:
The damper must be in the "open" position when burning.
note:
If the damper becomes unthreaded, it will remain in the "open" position.
note:
If the damper does not operate properly, do not proceed with chimney installation. The damper operation
should be thoroughly checked before the chimney is installed.
16
W415-1676 / D / 03.02.20
OPEN
CLOSED
OPEN
OPEN
CLOSED
CLOSED