Publicité
Getting Connected and Installing Drivers (Macintosh)
xfig.05-46e_30
3
With the volume turned down on
the UA-700 and on your
peripheral audio equipment, click
[Start Test].
Test signals will be output from
the UA-700; left first, then right, as
indicated in the screen.
fig.05-49e_30
4
In the Sound dialog box, click the
Input tab.
In Choose a source for sound
input (Device), select USB audio.
* Do not check "Play sound through
output device".
5
When you are finished making settings, close the Sound dialog box.
From the File menu, select Quit.
50
The output volume of the
UA-700 cannot be
adjusted with the Mac OS
sound dialog box. Make
volume adjustments
through other means,
such as on the speaker
system you are using.
If USB audio is not
displayed, close the
"Sound" dialog box, and
disconnect the UA-700's
USB cable from the
Macintosh. Perform the
driver installation (p. 48)
once again.
Publicité
Chapitres
