Publicité
If you changed "What action do you want Windows to take?"
If you changed the What action do you want Windows to take? setting,
restore the original setting after Windows restarts.
1. If you are using Windows XP Professional, log on to Windows using
the user name of an administrative account (e.g., Administrator).
2. Click the Windows start menu, and from the menu, select Control Panel.
3. In "Pick a category", click "Performance and Maintenance".
* Depending on how your system is set up, the System icon may be displayed directly
in the Control Panel (classic view). In this case, double-click the System icon.
4. In "or pick a Control Panel icon", click the System icon. The System Properties
dialog box will appear.
5. Click the Hardware tab, and then click [Driver Signing]. The Driver Signing
Options dialog box will appear.
6. Return the What action do you want Windows to take? setting to the original
setting (either "Warn" or "Block"), and click [OK].
7. Click [OK]. The System properties dialog box will close.
Next, you need to make the driver settings.
(➝ Settings and checking (p. 33))
Windows 2000 users
1
With the UA-700 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse
(if used).
2
Log on to Windows as a user with administrative privileges (such as
Administrator).
3
Open the System Properties dialog box.
Click the Windows Start button, and from the menu that appears, select
Settings | Control Panel. In Control Panel, double-click the System icon.
Getting Connected and Installing Drivers (Windows)
If the UA-700 is already
connected to your
computer and a message of
"Add New Hardware
Wizard" is displayed, go to
the included CD-ROM
folder named
DRIVER\USB_XP2K\WDM
or
DRIVER\USB_XP2K\MME,
open the file
Readme_e.htm, and read
the "Troubleshooting"
section entitled "You
attempted to install using
the above procedure, but
were not able to".
21
Publicité
Chapitres
