Sound Is Interrupted During Audio Playback - Edirol COSM Audio Capture UA-700 Mode D'emploi

• Are two or more audio devices such as the UA-700 or a mixer connected to your computer?
Try connecting only a single UA-700 unit, and check whether the noise disappears. If numerous audio
devices are connected to a computer, noise may occur depending on your system. In such cases,
connect only the UA-700 to your computer.
• Does your sequencer software support ASIO 2.0?
If your ASIO-compatible software does not support ASIO 2.0, it will not operate correctly if you use
[UA-700 ASIO2.0 16bit] or [UA-700 ASIO2.0 24bit] as the ASIO driver.
In this case, select either [UA-700 ASIO1.0 16bit] or [UA-700 ASIO1.0 24bit] as the ASIO driver.
• Does your sequencer software support 24-bit audio?
If your ASIO-compatible software does not support 24-bit audio input/output, it will not operate
correctly if you select [UA-700 ASIO1.0 24bit] or [UA-700 ASIO2.0 24bit] as the ASIO driver. In this
case, select either [UA-700 ASIO1.0 16bit] or [UA-700 ASIO2.0 16bit] as the ASIO driver.
• Is the UA-700 connected to a USB hub?
Try connecting the UA-700 directly to the USB connector of the Macintosh itself.
• Are you using a USB device other than the UA-700?
Try turning off the power of all USB audio devices other than the UA-700.
• In some cases, you may also be able to solve this problem by grounding the chassis of your
computer, or the grounding connector of the AC power supply plug of your computer. In
addition, you can check whether any devices that produce a strong magnetic field are located
nearby, such as a television or microwave oven.
• Also check the troubleshooting item Sound is interrupted during audio playback (p. 247)

Sound is interrupted during audio playback

• Are many applications running on your computer?
If you use many applications or start up other applications during playback, playback may be
interrupted, depending on your computer system. Please exit unneeded applications, and try again. If
this does not resolve the problem, try restarting your computer.
• Graphic accelerators may cause noise to be heard during audio playback.
Use the following procedure to turn the graphic accelerator "Off".
1. In the Windows Control Panel, double-click Display to open the Display Properties dialog
box, and click the Settings tab.
2. Click Advanced, and in the properties that appear, click the Performance tab.
For Windows XP, click Advanced, and then click the Troubleshoot tab.
Troubleshooting
247