Publicité
Getting Connected and Installing Drivers (Windows)
fig.05-2e_30
4
Click the Hardware tab, and then
click [Driver Signature].
Open the Driver Signing Options
dialog box.
fig.05-3e_30
5
Make sure that "File signature
verification" is set to "Ignore".
If it is set to "Ignore", simply click
[OK].
If it is not set to "Ignore", make a
note of the current setting
("Warn" or "Block"). Then change
the setting to "Ignore" and click
[OK].
After installing the driver, restore
the original setting.
(➝ If you changed "File
signature verification" (p. 26))
6
Click [OK] to close the System Properties dialog box.
7
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
8
Insert the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
9
Click the Windows Start button. From the menu that appears, select
"Run...".
Open the "Run..." dialog box.
22
If you changed "File
signature verification" in
step 5, you must restore
the previous setting after
you have installed the
driver. (–> If you changed
"File signature
verification" (p. 26))
Publicité
Chapitres
