Configuration; Accessing Setup Mode; Entering Setup Mode - Mettler Toledo IND231 Mode D'emploi

2

Configuration

2.1.

Accessing Setup Mode

2.1.1.

Entering Setup Mode

The configuration of the IND231/IND236 terminal is accessed by pressing and holding the MENU
key
A login screen (Figure 2-1) displays and the user must enter the correct password in order to
advance into setup.
Access to items in setup is controlled by a password. Error! Reference source not found. shows
which parts of the setup tree are accessible to a user logged in using the Supervisor password.
To enter a password:
1. When the login screen displays, use the scale function keys to enter the password (Error!
2. Press the
30100541 | 00 | 08/2013
For further information about terminal configuration, please refer to the enclosed Documentation
CD-ROM.
.
Password
Supervisor
Reference source not found.).
key. If the password is correct, the terminal will enter setup mode, and the setup
menu will be displayed. If the password is not valid, the display returns to the weighing mode.
If the terminal is configured as legal for trade, the user can only access setup by pressing
the setup-switch (a hardware switch on main-board, indicated in Figure 2-2). The terminal
will then display the F1 (Scale) menu label and scale parameters can be modified.
Figure 2-1: Login Screen
Table 2-1: Passwords and Access Levels
F1.1.2 = Approved
F1.6 (second unit), F2, F3, F4; F5.2 (statistics); F5.8 (print
configuration)
METTLER TOLEDO IND231/IND236 Quick Guide
F1.1.2 = None
2-1