Configurable Function Keys - Mettler Toledo IND231 Mode D'emploi

The symbols are described in Table 1-4.
1.3.

Configurable Function Keys

Functions typically performed by operators can be accessed using the two function keys. The
function key assignments are displayed at the bottom of the normal basic weighing display in
IND231/IND236 terminal (Figure 1-4).
1-4 METTLER TOLEDO IND231/IND236 Quick Guide
• Below the system line is the weight display.
•
At the bottom of the basic basic weighing display is a block used for showing function
selection of keys "F1" and "F2".
Symbol
Figure 1-4: Available Function Key Assignments
Table 1-4: Main Display Symbols
Explanation
Average piece weight
Accumulation weight
Auto accumulation
weight
Over/Under
checkweighing
Center of zero
Range 1, Range 2
Averaged or x10
weight
Minus value
Dynamic state
Dash and colon
B/G and net
Display counts
Unit
Symbol Explanation
Function keys:
F1 & F2
Expand display
Unit switch
Check weigh
Recall
Counting
Animal weighing
Accumulation
Date & Time
Backlight adjust
Zero
Tare
Key press indicator
Battery status
30100541 | 00 | 08/2013