Configuring Function Keys; Function Keys Assignment - Mettler Toledo IND231 Mode D'emploi

Functions include access to expanding the displayed weight resolution by 10, Unit switching,
Checkweighing, Recall, Counting, Animal weighing, Accumulation, Date & Time, Zero & Tare and
Backlight, adjustment. The procedure for assigning functions to the keys is described below.
1.3.1.

Configuring Function Keys

To access the function key assignment interface, press and hold the
weighing mode. The normal weight display will change to show an array of function icons, as seen
in Figure 1-5. The currently selected function is indicated by a small arrow and a line linking it to
the F1 or F2 symbol. Use the LEFT and RIGHT direction keys (
next to the desired function. Figure 1-5 shows the X10 function assigned to F1 (left) and the Switch
Units function assigned to F2 (right).
Once the desired assignment is indicated, press the PRINT key
return to normal weighing mode.
1.3.2.

Function keys assignment

Options for the assignment of the FUNCTION keys are described in Table 1-5.
30100541 | 00 | 08/2013
Figure 1-5: Function Keys Assignment Interface
Table 1-5: Function assignment
Keys
Expand display
Unit switch
Checkweighing
Checkweighing Target Recall
Counting
Animal weighing
Accumulation
Date & Time
Zero
Tare
METTLER TOLEDO IND231/IND236 Quick Guide
or key when in basic
and ) to position the arrow
to confirm the selection and
Function
1-5