Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN – Original instructions
I. Presentation
II. Characteristics
I. PRESENTATION
1.1- Presentation
The chainsaw is designed for sawing and/or cutting wood and wooden material.
It should only be used by skilled operators who have read the instructions manual.
This chainsaw can also be used as a pole pruner saw thanks to the two provided extension poles.
1.2- Intended Use:
The chainsaw is intended for outdoors use for felling trees, sawing logs, branches, wooden beams,
planks...; for cross or longitudinal cuttings.
The chainsaw is intended for use in the private domain, i.e. a household use to cut wood within the
tool's characteristics
1.3- Not Intended Use:
The chainsaw is not intended for professional and/or industrial use (for ex. Forestry felling or pruning).
Do not use for applications not covered in this manual, such as cutting or sawing plastics, metals.
Minerals (eg. ceramic, stones...)
Do not use other chains and / or accessories than those provided or recommended by the manufacturer,
to avoid a danger.
The manufacturer or seller cannot be held responsible for incorrect or non-compliant use of machine
1.4- Residual Risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors (Read
the safety warnings).
1.5- Parts List
1- Rear handle
2- Cable holder
3- ON/OFF trigger switch
4- Power cord with plug
5- Male connection
6- Engine
7- Front handle
8- Front hand guard
9- Chain
10- Guide bar
11- Shield
12- Spike bar
13- Safety lock button
14- Female connection
15- Extension poles
16- Strap hanging point
17- Handle
18- Shoulder strap
19- Angle adjustment button
20- Male connection
III. Safety instructions
IV. Getting Started
V. Operation
VI. Maintenance and Storage
Fig.1
Publicité
Table des Matières
