Getting Started - Ribimex Ribiland PRTRE300R Manuel D'instructions Et D'utilisation

To help in the prevention and reducing the risk of the white finger disease, please note the following:
-- wear gloves and keep your hands warm;
-- maintain a firm grip at all times, but do not squeeze the handles with constant pressure,
-- take frequent pauses
The operator should closely monitor the condition of their hands and fingers, and if any of the
symptoms appear, seek medical advice immediately.
18. Warning
The use of any accessory or attachment, other than one recommended in this instructions manual may
present a risk of injury (to persons or animals) and may cause damages.
The user and/or operator are responsible for any damages or injury caused to properties and/or
persons while working with the chainsaw.
19. Remarks
The safety precautions and instructions given in this manual are unable to cover in detail all the
conditions and situations that may arise.
The operator and/or user must use common sense and caution when operating the product especially
for any matters that are not referred in the above.
20. WARNING
Do not assume of your knowledge of the chainsaw.
Remember that a split second of negligence is sufficient to cause serious injury and/or damage.
3.8- In the event of emergency
Stop immediately the chainsaw and unplug from mains.
Assist the injured person with first aid and call for medical assistance as quickly as possible.
IV. GETTING STARTED
4.1- Unpacking
Remove product from its packaging.
Check that product and accessories are not damage.
4.2- Content
The unit package contains:
- Handle unit
- Power unit
- Chain and Guide bar
- Two extension poles
- Shoulder strap
- Flat wrench
4.3- Assembly
WARNING! - The saw chain has very sharp edges.
WARNING! Make sure that the chainsaw is switched off and unplugged from the mains
- Use thick protective gloves for safety.
power source before proceeding to any intervention on the product such as
assembly, maintenance, repair, cleaning.