Pioneer XC-HM82-K Mode D'emploi page 33

9
9
5
Tap (touch) AirPlay.
6
Once the name of this receiver is displayed, select it.
HM82 *****
Note
• "*****" is the lower three bytes of the MAC address.
7
Select a track and play it.
Swipe (slide) and hide display of the Control Center.
Playback will begin through this receiver.
HM82
*****
Note
• If an AirPlay password has been set, you may be required to
input the password when starting AirPlay.
You may set an AirPlay password in the following ways.
Wireless Accessory Configuration (page 38)
-
AirPlay password on the Network Setting screen
-
AirPlay password on the Web Control screen
-
Network quick setup guide
Listen to music on a computer or NAS
3
(network attached storage)
1 Press the STANDBY/ON button.
The power to the receiver will be turned on.
STANDBY/ON
OPEN/CLOSE
DIMMER TIMER SLEEP
INPUT
iPod/USB CD BT AUDIO SOUND
2
Connect a NAS that supports DLNA or a computer with
Windows Media Player 12 installed to the same router
as this receiver.
Internet
Wireless LAN
router
iPhone LAN
3 2 1 WAN
Computer
LAN cable
(commercially
available)
Modem
5 V 2.1 A PHONES AUDIO IN
ON TIMER
NAS
33