Internet Radio - Pioneer XC-HM82-K Mode D'emploi

9
9
Connection method 1 | Connect a LAN cable
1
Connect the receiver and the router using a LAN cable.
Internet
LAN cable
(commercially
available)
Computer
This receiver's rear
panel
2
Press the STANDBY/ON button.
The power to the receiver will be turned on.
STANDBY/ON
DIMMER
iPod/USB
Modem
Router
LAN
3 2 1 WAN
LAN (10/100)
WLAN
AL
ANTENNA
ANTENNA
OPEN/CLOSE
TIMER SLEEP
INPUT
CD BT AUDIO SOUND
3
Press the NET SERVICE button, and select Internet Radio.
Confirm that the cabled LAN operation mark

Internet Radio

Top Menu
Genres
Countries
Podcasts By Genre
Podcasts By Location
Note
• If the cabled LAN operation mark is not shown, check that the LAN cable is firmly inserted
into both this receiver and the router.
• This receiver is shipped with DHCP settings turned "On". If your router does not support
DHCP, please perform the settings manually. (A: Wired setting on page 37)
• If "Empty" is displayed, there is a possibility that the router is not connected to the internet.
Check whether other connected devices, such as a computer, are able to use the internet. If
not, connect the router to the internet. Refer to the router's user manual for details on how
to do so.
Network quick setup guide
is displayed.
25