Front Fork - Yamaha YZ250 2005 Manuel D'atelier Du Proprietaire

EC550000

FRONT FORK

7 Nm (0.7 m•kg, 5.1 ft•lb)
Extent of removal:
Extent of removal
Preparation for
removal
1
1 Front fork removal
Order Part name
FRONT FORK REMOVAL
Hold the machine by placing the
suitable stand under the engine.
Front wheel
Front caliper
Number plate
1 Protector
2 Pinch bolt (handle crown)
3 Damper assembly
4 Pinch bolt (under bracket)
5 Front fork
FRONT FORK
Q'ty
w
Support the machine securely so there is no dan-
ger of it falling over.
Refer to "FRONT WHEEL AND
REAR WHEEL"section.
Refer to "FRONT BRAKE AND
REAR BRAKE"section.
Refer to "SEAT, FUEL TANK AND SIDE
COVERS" section in the CHAPTER 4.
1
2 Only loosening.
1 Loosen when disassembling the front fork.
Use special tool. Refer to "REMOVAL POINTS".
2 Only loosening.
1
5-26
CHAS
23 Nm (2.3 m•kg, 17 ft•lb)
20 Nm (2.0 m•kg, 14 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
Remarks