Table des Matières
Publicité
CRANKCASE AND CRANKSHAFT
4-67
EC4N3302
Crankshaft
1. Remove:
9 Crankshaft 1
Use the crankcase separating tool 2.
Crankcase separating tool:
YU-1135-A/90890-01135
NOTE:
Make appropriate bolts 3 as shown available by
yourself and attach the tool with them.
cC
Do not use a hammer to drive out the
crankshaft.
EC4N3401
Crankshaft bearing
1. Remove:
9 Bearing 1
NOTE:
9 Remove the bearing from the crankcase by
pressing its inner race as shown in å.
9 If the bearing is removed together with the
crankshaft, remove the bearing using a general
bearing puller 2 as shown in ∫.
9 Do not use the removed bearing.
EC4N4000
INSPECTION
EC4N4101
Crankcase
1. Inspect:
9 Contacting surface a
Scratches ¡ Replace.
9 Engine mounting boss b, crankcase
Cracks/Damage ¡ Replace.
ENG
Publicité
Table des Matières
