Before Using The Unit - Lagrange Glaces Creativ' Notice

STARTING AND USE

BEFORE USING THE UNIT

Before the first use, leave your unit on a flat surface for
*
without plugging it in.
Be sure that you always keep the unit in a horizontal position
*
when you move it to avoid the risk of damaging the compressor.
Otherwise, wait hours before using your unit again.
12
USE
ST
1
When you unpack your unit, carefully remove all of the packaging
*
materials, bags, and packaging labels.
Make sure that all of the parts and accessories are present and intact.
*
Before using your unit, clean the fixed vat, the removable vat,
*
the cover and the blade well with soapy water or water with
dishwashing liquid added.
Rinse and dry thoroughly.
*
See upkeep section.
ASSEMBLY OF THE ICE CREAM MAKER
Warning, make sure that the unit is unplugged before any operations.
*
Place the removable vat into the body of the unit and push it in
*
completely. Position the hooks of the handle facing the slots of
the fixed vat.
Put the mixer into the removable aluminum vat.
*
Position the cover and lock it by turning it counter-clockwise.
*
STARTING
Before using the unit, prepare your ice cream mixture (see recipes).
*
If you use a hot preparation, let it cool down in the refrigerator until
the mixture is at the temperature of the refrigerator (about
hours
12
Put the unit on a flat surface and make sure that the aeration
*
gratings are not blocked.
Plug in the unit. The screen will then display "
*
Pour the preparation into the removable vat. IMPORTANT: Never
*
put hot foods into the vat.
IMPORTANT: never fill the vat more than
*
because the volume increases as the ice cream is made.
Position the mixer in the axis of the motor and close the cover by
*
turning it counter-clockwise.
Press the "start/stop" button to turn the unit on. The screen
*
will display "
to stop the unit.
To change the pre-selected time, press the "+" and "-" buttons:
*
• "+" button: One short press on this button will increase the
time by one minute, one long press will increase the time more
rapidly. The maximum time is
• "-" button: One short press on this button will decrease the
time by one minute, one long press will decrease the time more
rapidly. The minimum time is
"Start/pause" button: After selecting the time, press this button
*
to start the mode selected. You can press the start/pause button at
any time to put the unit in pause and thereby put it automatically
in the "keep cold" function.
Do not operate your unit without its cover in order to avoid loss
*
of cold.
56
: ". You can press the on/off button at any time
60 00
60 minutes.
5 minutes.
°C).
10
".
00
60 % ( 720 cl)