Pratissoli LK Serie Manuel De Réparation page 38

Take out the radial seal ring (pos. , Fig. 5) and the outside
O-ring (pos. , Fig. 6).
Remove the tab from the PTO shaft (pos. , Fig. 7).
Fig. 4
Unscrew the attachment screws of the shaft end cover
(pos. , Fig. 8) and take the cover off the PTO shaft.
Fig. 5
Unscrew the casing cover attachment screws (pos. , Fig. 9)
and remove it. Remove the O-ring and replace it if necessary.
Fig. 6
38
Fig. 7
Fig. 8
Fig. 9