Schematic diagram
C
B
A
Optionally, a mirror-inverted assembly is also possible.
No.
Designation
A
Process air inlet
B
Regeneration air inlet
C
Humid air outlet (regeneration air)
D
Dry air outlet
EN
Assembly and installation
Power connection
The illustrations below feature the series from the TTR 800
through to the TTR 3700 and can be used exemplarily for all
D
device versions of the TTR series. The mains supply terminals
are situated directly at the main switch behind the main switch
cover.
1. Loosen the two screws (34) of the front cover.
2. Slightly lift the front cover and open it.
3. Loosen the screws (35) of the electrical control box cover.
4. Remove the electrical control box cover either by pulling it
forwards or by lifting it.
D
desiccant dehumidifier TTR 2000 / TTR 2800 / TTR 3700
Warning of electrical voltage
Work on the electrical components must only be
carried out by a qualified electrician!
34
35
10