Trotec TTR 2000 Mode D'emploi page 61

Operation screens of the control module Millenium
EN
1. Start screen
In addition to the contact data this screen also shows the version number of
the installed programme of your Millenium.
Please quote this when contacting.
2. Temperature screen
Display of maximum and actual values for the regeneration and exhaust air
temperatures
MAXIMUM RHZ
ACTUAL RHZ
MAXIMUM RAL
ACTUAL RAL
3. Temperature and rotor screen
T-RHZ MIN.
DELAY-TIME
CHECKSUM
ROTORSPEED
4. Relative humidity screen (optional)
1Ext/2Int/3P
ACT.Moist
SetP.Int.
SetP.Ext.
5. Dew point screen (optional)
1Ext/2Int/3P
ACT.Moist
SetP.Int.
SetP.Ext.
desiccant dehumidifier TTR 2000 / TTR 2800 / TTR 3700
Target value regeneration air temperature
Actual value regeneration air temperature
Target value regeneration exhaust air temperature
Actual value regeneration exhaust air temperature
Minimum temperature of the regeneration air after
completion of waiting period
Waiting period in seconds
Counter for automatic switch-off when hot
Current control value of the rotor speed [1/10 h]
Selection target value external = 1, internal = 2,
control value external = 3
Actual value humidity in [% RH]
Target value humidity in [% RH], can be modified
Target value external humidity in [% RH], display only
Selection target value external = 1, internal = 2,
control value external = 3
Actual value humidity in [°Cdp]
Target value humidity in [°Cdp], can be modified
Target value external humidity in [°Cdp], display only
24