Responsibilities Of Personnel; Product-Specific Hazards; Manipulation Of And Maintenance Work On The Sensor - Mettler Toledo InPro 8600i Serie Mode D'emploi

12
© 07 / 16 Mettler-Toledo GmbH, CH-8902 Urdorf
Printed in Switzerland
– The operator/user must be fully aware of safety and potential danger factors during work with
the sensor and this awareness must be checked by the operator at regular intervals.
– Measures must be taken to ensure that the sensor is only operated in a safe and fully
functional condition.
Caution! Before the sensor is put into operation, the operator must have already clarified
that use of the sensor in conjunction with the other associated equipment and resources
is fully authorized.

2.8.2 Responsibilities of personnel

– All persons whose duty it is to operate the sensor are under obligation to read chapter 1 "Intro-
duction" and chapter 2 "Safety" as well as the warning notices in this instruction manual.
– In addition to the instruction manual, generally valid legal and other binding regulations for
work safety and accident prevention must be adhered to.
– Any method of working which is doubtful from a safety perspective and which exceeds the
operation according to regulations must be omitted.
Notice: Before every start-up, the sensor must be checked for:
– damage to the connections, fastenings, etc.
– leakage
– perfect functioning
– authorization for use in conjunction with other plant equipment and resources.
Caution! A defective sensor may neither be installed nor put into operation. Faulty con-
tainment or installation out of conformance with regulations and instructions can lead to
the escape of medium or to pressure surges (explosion), potentially harmful both to per-
sons and to the environment.
2.9

Product-specific hazards

2.9.1 Manipulation of and maintenance work on the sensor

Notice: Before dismantling the sensor or commencing any maintenance work on it, en-
sure that the equipment in which the sensor is installed is in a safe condition (depressur-
ize, no explosion risk, empty, rinse, vent, etc.).
It is principally necessary to wear personal protective outfit such as protective goggles
and clothing.
Only such maintenance work as is specifically described in this instruction manual may
be performed on the sensor.
Only original spare parts from METTLER TOLEDO may be used for replacing defective
components (see chapter 7).
Danger! Non-compliance with the prescribed maintenance instructions can endanger
personnel and the environment.
InPro 8600 i Series
InPro 8600 i Series
30 113 529