Size Adjustment; Shift Adjustment - Sony VPH-G90E Manuel D'installation

SIZE Adjustment

SHIFT Adjustment

Adjust the picture size if it does not fit the screen.
1
Press the RGB SIZE key.
(Use the RGB SIZE key even for the signal other than RGB.)
2
Adjust the picture size with the arrow keys.
V : The vertical size is expanded.
v : The vertical size is reduced.
b :The horizontal size is expanded.
B :The horizontal size is reduced.
R G B S I Z E A D J
C O A R S E
H c : [ 8 0 ]
H f : 8 0
V c : 8 0
V f : 8 0
To adjust precisely, press the RGB SIZE key again. The projector
enters the FINE adjustment mode, and you can fine adjust the size.
By pressing the RGB SIZE key again, the COARSE adjustment mode
is resumed.
3
Press the MEMORY key to save the adjustment data.
If the picture needs to be shifted to fit the screen, adjust the position of the
picture.
1
Press the RGB SHIFT key.
(Use the RGB SHIFT key even for the signal other than RGB.)
2
Press the POSITION +/– keys to select the adjustable range of the
vertical shift (V SHIFT).
Note
When the video, S video, component or SDI 4:2:2 signal is input, V
SHIFT is automatically fixed to NARROW and the adjustable range
will become narrower than that of the RGB or HDTV signal.
Picture
Screen
ADJ:
Adjustments
(continued)
123
(GB)