Sony VPH-G90E Manuel D'installation page 73

When MANUAL is selected, the following display
appears.
Select the adjustment item with the v key, then adjust
the item with the B or b key.
C O L O R U N I F O R M I T Y
H - R E D
SEL: ADJ :
H - R : 1 2 8
SET: ENTER
H - B : 1 2 8
EXIT: MENU
V : 1 2 8
H-R: Adjusts red in the horizontal direction so that it
becomes uniform.
H-B: Adjusts blue in the horizontal direction so that it
becomes uniform.
V: Adjusts brightness in the vertical direction so that it
becomes uniform.
Press the ENTER key after the adjustment is complete.
BRIGHTNESS UNIFORMITY
Eliminates hot spots caused by the difference in
brightness to make the brightness of the whole screen
uniform.
I N P U T - A
S
C O L O R
PIC
ORBITING U N I F O R M I T Y : M A N U A L
H - R : 1 2 8
INT. OSC
SETTING H - B : 1 2 8
V : 1 2 8
TIMER
B R I G H T N E S S
U N I F O R M I T Y : M A N U A L
UNI
FORMITY H : 1 2 8
V : 1 2 8
ABL
LINK
SEL: SET: ENTER
EXIT: MENU
OFF: This position is selected at the factory.
STANDARD: Set to this position to obtain brightness
uniformity which fits the screen selected in the
SCREEN TYPE option in the SERVICE
SETTING 1 menu.
MANUAL: Set to this position to adjust brightness
uniformity manually by displaying the external
signal (all white).
When MANUAL is selected, the following display
appears.
Adjust the brightness in the horizontal direction with
the B or b key and that in the vertical direction with
the V or v key so that hot spots disappear from the
screen.
B R I G H T N E S S U N I F O R M I T Y
ADJ :
SET: ENTER
H : 1 2 8
EXIT: MENU
V : 1 2 8
Press the ENTER key after the adjustment is complete.
73
Before adjustment (GB)