Using The Linked Picture Orbiting Function - Sony VPH-G90E Manuel D'installation

Link Functions List of the Projection Distance by Angle of Optical Axis

Using the Linked Picture Orbiting Function

First projector
(master)
TRIGGER
Connecting cable with
stereo miniplugs
LINK IN
Second projector
(slave)
TRIGGER
to LINK IN of the third projector
148
(GB) Others
What is the linked picture orbiting function?
The picture orbiting function prevents CRT burn by shifting the picture
projected on the screen automatically.
If you connect the LINK jacks and the PJ COM connectors of each projector
when multiple projectors are used, the linked picture orbiting function can
shift the pictures of all the projectors regularly.
There are two picture orbiting modes: PIC ORBITING for shifting the
picture horizontally and vertically to cycle through the screen and SCAN
LINE SHIFT for shifting the scanning lines vertically.
*
IN OUT
R
IN OUT Y IN C IN
R-Y/P
IN OUT
VIDEO S VIDEO
LINK
IN OUT
RS-232C/422A
RS-232C RS-422A
PLUG IN POWER
CONTROL S DEVICE INDEX
LINK OUT
Attach the
supplied
terminator.
*
IN OUT
R
IN OUT Y IN C IN
R-Y/P
IN OUT
VIDEO S VIDEO
LINK VIDEO
IN OUT
RS-232C/422A
RS-232C RS-422A
PLUG IN POWER
CONTROL S DEVICE INDEX
LINK OUT
Note
• Be sure to terminate the PJ COM OUT connector on the last projector by
attaching the supplied terminator.
Rear
AC IN
G B SYNC/HD VD
Y B-Y/P
R B
INPUT A
IN PJ COM OUT
REMOTE
PJ COM
OUT
PJ COM IN
G B SYNC/HD VD
Y B-Y/P
R B
INPUT A
IN PJ COM OUT
REMOTE
PJ COM OUT
* For the VPH-G90E model:
IFB-G90E Video Interface Board (optional)
to PJ COM IN of the third
projector
AC power cord (supplied)
to AC outlet
INPUT A
Video
equipment
Signal flow