Getting Started; Edit Mode - BH LKT8 Manuel Du Propriétaire

GETTING STARTED

If the window is displaying"----" then the safety key has been ejected. Please insert the safety
key to access the machine.
The Weight window will be the first to appear and display preset value 70KG(150LBS) with
range 23~180KG(50~400LBS). After setting a value, press ENTER and this window will
return to Start/Ready status. Setting the weight will make the consumption of CALORIES
different for each user. This setting can only be entered after turning the treadmill on. You
do not need to set the weight in PROGRAM.
OPERATION INSTRUCTIONS
Once you are in the Start/Ready mode, press MODE to edit Programs. If you press QUICK
START, then you will enter the into a default menu and your exercise will begin immediately.
Speed 0.5~12.5MPH, STEP 0.1; Incline 0~15, STEP1, Instant Speed Key 1, 2, 4, 6, 8, 10,
Incline Speed Key 2, 4, 6, 8, 10, 12.
When the safety key is replaced after it has been removed, the incline will. You have to press
the start button and then the incline will reset. When you turn the treadmill on, the incline
will not reset. You have to press the start key and then the incline will reset. Under Start/
Ready status, hold the stop button for 5 seconds and the incline will reset at any position.
If you press the stop button in any program, then the program will stop. If you want to
continue the program, you can press start key or press stop button for another time and
return to Start/Ready Status.

EDIT MODE

1. In the Start/Ready Status, press Mode and press +/- to select MENU mode and PROGRAM
mode.
2. Program Mode: press +/- to edit Programs 1-10. Seven segment display will display
P1~P10, press +/- to edit.
3. WARM UP and COOL DOWN function: During WARM UP or Program position,
change speed or incline level, and the value will increase or decrease in the following levels.
COOL DOWN is not affected and STOP is the only function which can be carried out.
17