Assembly Instructions - BH LKT8 Manuel Du Propriétaire

STEP 1
Pull the main wire out of the Left Upright
Tube (D) with the guide wire. Then insert
both uprights (C, D) into the frame (B),
and tighten with the Socket Screws (a, b).
Tighten the screws, cover the screws with
Bolt Covers (c).
Note: Two people are required for this step,
especially to hold the Upright Tubes (C, D)
so they do not fall and cause injury.
STEP 2
After the left and right Upright Tubes
are tightened, insert the left and right
Handrails (H, I) into the computer frame.

ASSEMBLY INSTRUCTIONS

13