Technical Data; Description Of The Machine; Scope Of Delivery - Proxxon LBS/E Manuel D'utilisation

Masquer les pouces Voir aussi pour LBS/E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
c) Direct the discharge of the spinning wire brush
away from you. Small particles and tiny wire frag-
ments may be discharged at high velocity during the
use of these brushes and may become imbedded in
your skin.
Protection class II device
Wear safety glasses!
Use indoors only
Please do not dispose off the machine!

Description of the machine

The PROXXON LBS/E long-necked drill/grinder is the ideal
device for micro drilling, milling, grinding, polishing,
brushing, rust removal, engraving, chasing and separat-
ing. You can work on steel, non-ferrous metals, glass,
wood, minerals and ceramics.
With its long neck the device is especially suitable for
machining in difficult to access hollows, such as for the
inside of pipes, deep drill holes and cavities.
The drill spindle is arranged free from play through the
precision ball bearing in the aluminium die casting hous-
ing. A quiet, permanently excited special motor with elec-
tronic speed control ensures maximum performance at
minimum size. Compact housing made of fibre-glass re-
inforced nylon with 20 mm fit at the aluminium housing.
With the 20 mm fit across the entire neck length (75
mm), the device can be clamped, for example, in an up-
right of sensitive drill and can be entirely pushed through.
The resulting free length enables best accessibility even
for complicated tasks.
The supplied steel collet chuck makes it easy to ex-
change the tools and offers a much higher truth of run-
ning than a drill chuck.
- 14 -
Legend
1. Speed control button
2. ON-OFF - switch
3. Hanger
4. Mains supply cable
5. Locking button
6. Spigot nut with steel clamp jaw
7. Fitting collar for drill stand (Ø 20 mm)
8. Steel clamping jaws
9. Chuck key

Technical data

Length:
Weight:
Collar:
Motor
Voltage:
Rotary speed:
Power consumption:
Noise development:
Vibration in the handle:
Please note that the sound and vibration measurements
in particular have been performed with Proxxon bits and
cutters. When using third-party brands we cannot guar-
antee compliance with the statements given here!

Scope of delivery

1 pc. LBS/E long-neck professional drill/grinder
1 pc. Storage case
1 pc. Operating instructions
1 pc. Safety guidelines
1 pc. Key
6 pcs. Collets (1.0-1.5-2.0-2.4-3.0 and 3.2 mm)
Operating instructions
Important!
• Never press the lock button while the device is oper-
ating.
approx. 300 mm
approx. 630 g
Ø 20 mm
230 V, 50/60 Hz
5,000 - 22,000 rpm
max. 100 W
70 dB (A)
2,5 m/s
2

Publicité

Table des Matières
loading

Table des Matières