Angelcare AC117 Manuel De L'utilisateur page 16

5.5 - SOUND
TO ACTIVATE SOUND:
1
3
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IMPORTANT
To avoid feedback (whistling), keep both
units at least 10 feet apart (3 meters).
ADJUST THE
SOUND LEVEL
5.6 - VOICE ACTIVATION (VOX ON) OR CONTINUOUS SOUND (VOX OFF) MODE
Allows you to select your option on how you monitor sound: VOX (voice activation picks
up sound based on the setting of the sensitivity level) or Continuous (sound monitoring is
continuously on, picking up all sounds).
16
2
IF YOU HEAR NO SOUND:
• Check that both units are powered ON.
• Check that both units are plugged into
• Check the batteries in both units
• Bring the Parent Unit closer to the
PUT IN
MUTE MODE
Raise
volume
Lower
volume
Press the VOLUME - until L0
is being displayed. When in
MUTE the sound icon will
flash to indicate this.
1) Press and hold the MENU
then press the OK button until the
Sound Monitoring icon blinks.
The sound monitoring
icon will blink.
2) Using the UP and DOWN
the function ON or
3) Press the EXIT button to confirm
your choice.
functioning electrical outlets.
(replace or recharge them if necessary).
Nursery Unit.
PUT IN DIALOGUE
MODE
Button
arrows, turn
OFF.
Press and
hold talk
button to
speak to
baby