Telestar M 10 Manuel D'utilisation page 90

7. OPERATION AND MENU
Sound (beep), DAB/DAB+ or FM.
Please note that when selecting FM, DAB/DAB+
at least one favourite station of the respective reception
mode must be saved already.
E
In the next line, set the volume with
which the alarm clock is to be activated.
In the next line, set the time at which the alarm clock is to be ac-
tivated. To do this, use the number pad on the remote control or
the knob on the device.
To confirm the single entries, these need to be
saved by using the ENTER button.
Activate the alarm clock via the 'On' line.
Deactivate the alarm clock via the 'Off' line.
To stop an alarm, hit the standby button on
the remote control or on the device.
To active that snooze function, press the
ENTER button on the device or press
the knob on the device.
The alarm will then be paused for 5 minutes.
After 5 minutes, the alarm is reactivated.
To deactivate the alarm until the next day, press the Standby/
Power button on the device.
Operating Manual 90