Connecting The Device - Telestar M 12i Manuel D'utilisation

2. SAFETY INSTRUCTIONS
Take care to prevent moisture, water
or splash water from coming into contact with the device
and ensure that receptacles filled with water -
e.g. vases - are not placed on or near the
power unit.
>
>
>

2.4. Connecting the device

>
>
>
>
>
bda_TELESTAR_M12i_01_20_V5_DE_EN_F_NL_I_.indd 89
In the event that foreign objects or liquid should enter
the device or power unit, immediately unplug
the power unit. Have a qualified specialist inspect the
device before using it again.
Otherwise there is a risk of electrocution.
Make sure that the device and power unit is not at risk
of dripping or splash water and
that there are no open flames (e.g. lit candles)
near the device or the power unit.
The power unit must never be touched or grabbed with
wet or moist hands.
Only plug the device into properly
installed, earthed and electrically secured power
sockets.
Please keep the power source (socket) easily
accessible.
Do not bend or squeeze any cables.
Before using the device, check whether the voltage
specification on the device corresponds to your local
power voltage. The specifications on the power unit
must correspond to the local power grid.
Only plug the device into a properly
89
E
TELESTAR M12i
17.02.2020 11:29:07