Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connection diagram for 7- pole plug:
Connection diagram for 13- pole plug:
4.4. Break time
The spraying can be stopped arbitrarily by releasing the handle off the pistol. Next acts one must comply, if the
spraying break last longer then ten minutes (or by abandoning the working area):
- By cleaning with use off the burner one must turn the temperature regulating button in the lowest position
and spraying for at least another 5 minutes for cooling down the burner kettle sufficient.
- Switch off the machine completely. Put therefore the key switch on position "0".
- Release the pressure of the pressure hose by pushing the handle for a moment.
4.5. Control indications
The control panel is located (as pictured) on the of the operating panel.
It contains a number off light indications with lamps and also an hour counter.
DiBO n.v. 80
Publicité
Table des Matières
