Tylo Prime+ 1611 Manuel D'utilisation page 14

Electrical Connections (inside Ceiling-Left front corner):
•
Near the Touch Screen harness in Ceiling connect Left
Wall wire #3 to Ceiling wire #3.
•
Connect Left Wall wire #7 to the Ceiling wire #7.
•
Connect Left Wall wire F to Ceiling wire F.
•
Connect Left Wall wire E to Ceiling wire E.
Electrical Connections (inside Ceiling-Left rear corner-not
pictured):
•
Connect the Right wall wire #7 to Ceiling #7 for valance lights.
Electrical Connections (inside the Ceiling-Right front corner):
•
Connect the Right wall wire #7 to Ceiling #7 for valance lights.
Sauna Room 230 Volt AC Power Cord:
• Plug the Sauna room power cord into the 10 amp wall receptacle as noted in page 3
Note: It is important that the sauna be plugged into a dedicated outlet of the correct rating. Plugging your
sauna into a shared circuit through can cause poor performance, circuit breaker tripping, or overheating
of the circuit.
3 Person Infrared Sauna Prime+ 1611 Page 14 150612
Rev. 3