Tylo Prime+ 1611 Manuel D'utilisation page 13

• Remove the foam blocks on the front corners, and place the glass panels in the slots in the
ceiling. Make sure the ceiling fits tight and is flat and level.
• Turn the wood ceiling cam locks to lock the ceiling into place.
Electrical Connections (inside the Ceiling panel-back right corner):
• Open all hatch doors on the ceiling to locate the necessary electrical plugs.
• Access the connectors and connect them according to the labels on the harness.
• Connect wire #4 from the Back Wall harness to the Ceiling wire #4.
• Connect wire #5 from the Back Wall harness to the Ceiling wire #5.
• Connect wire #6 from the Back Wall harness to the Ceiling wire #6.
3 Person Infrared Sauna Prime+ 1611 Page 13 150612
Rev. 3