Pitney Bowes mailstation2 Guide D'installation Rapide

Digital Postage Meter
Watch an online tutorial.
For a tutorial of the installation, visit pitneybowes.com/ca/en/mailstationsetup
As you follow these steps, also follow the screen prompts on your meter.
What's in the box
Mailstation2 Scale Power adapter
Postage Meter
SmartLink Device Power adapter
1
Connect your meter to a power source.
.
2
. Choose your connection.
OR
Wired
• Installation takes about 10 minutes
• Requires an available internet jack
and power outlet.
• Continue to Step 3 for instructions
Wired Instructions Only
3
. Connect the SmartLink device to either a wall internet jack or
router with the included internet cable.
Internet jack
4
. Plug the Power adapter into the SmartLink Device and into a power outlet.
5
. Plug the USB cable into the SmartLink Device and into the back of your meter.
6
. Attach the SmartLink Device to your meter with the included
Adhesive Fastener Strips.
1 2 3
© 2016 Pitney Bowes Inc. All Rights Reserved
Ink Tape sheets Quick install guide
USB cable Internet cable Fastener strips
(wired option only)
Plug the power adapter into the back of your
meter and a power outlet.
When the meter asks if you have an internet
connection, press Enter and continue to Step 2.
Wireless
• Installation takes about 15 minutes
• For Wireless Instructions, go to
pitneybowes.com/ca/en/smartlinksetup
• Wireless installation utilizes 'BlinkUp technology'
• Requires access to a wireless network
• Do NOT proceed to the following steps here
Note: lights on the device will remain off.
Router
• The SmartLink Device's lights will change color.
• Once the device is connected to the Internet,
the Network Connectivity light will blink green.
• In addition, the SmartLink device's Ethernet port
lights will show green for successful connection
status and yellow for network activity.
Note: lights on the device will remain off.
• The USB cable is the short cable.
• The SmartLink Device's lights will again change color.
• Once a network connection had been established,
the SmartLink device's USB Connectivity light will
turn green and its Network Connectivity light will
blink green.
For troubleshooting, visit:
pitneybowes.com/ca/en/smartlinkhelp
7
Install the scale.
.
8
Install the ink cartridge.
.
8a.
Add ink cartridge.
Continue-Press Enter
8b.
8c.
8d.
Front side
8e.
8f.
IMPORTANT - Is Ink
Cartridge installed?
9
Create a test print.
.
Good
A good test print means that there are no missing lines inside. If the test print is good, press Yes.
If the test is poor, press No to perform additional maintenance.
10
Link your meter to your Pitney Bowes account.
.
Once linked, you can access the full benefits of SmartLink and the Pitney Bowes Commerce Cloud.
Manage your meter - anytime and from anywhere - from our secure online portal.
Benefits of linking your meter include:
• Automatic software and postal rate updates
• Low ink and low fund notifications
• Simplified ordering for meter ink
• Remote diagnostics with support and error troubleshooting notifications
• Customized insights on meter and postage usage
• Adding postage to your meter from your computer
To link your meter to Pitney Bowes, visit: en.pitneybowes.ca/signin
• Existing pitneybowes.com account users will have equipment added to their profile automatically.
• You will need your account number and meter serial number to create a pitneybowes.com profile.
• Account Number: Available on the enclosed packing slip. This is the SHIP TO number.
• Meter Serial Number: Your Serial Number is usually located on a silver sticker on the front of your
meter (7-digits). Must be the serial number for the meter, not for other equipment or supplies
Congratulations! Your meter is now connected.
AW32090 Rev. A June 2016 Printed in the USA
Quick Install Guide
Attach the scale cable to the back of the meter.
Tighten the thumb screws.
On the meter screen, you should see "Add ink
cartridge. Continue-Press Enter." Press Enter.
Lift the cover of your meter and open the ink
cartridge latch by pressing down on the unlock
symbol . Remove and discard the yellow insert.
Find the included ink cartridge and remove the
silver foil strip from its bottom.
Install the ink cartridge into the meter. Then
press the top of the cartridge latch down to
lock it.
Close the cover and press Enter.
The meter will ask if the ink cartridge has been
installed. Press Enter.
When prompted, insert a spare envelope or a tape
sheet for a test print.
(Note: to print correctly, insert tape or envelope against the
rear and side walls. The system will detect the envelope
and atuomatically begin printing.)
Poor
*Aw32090REVA*