MINN KOTA TERROVA Instructions D'installation page 10

INSTALLING THE TERROVA
9
e. Replace the four sideplate screws using a #3 or
#2 Phillips screwdriver. Two of these screws will be
located on each side of the mount.
10
ITEM(S) NEEDED
#18 x 5
f. Take the Foot Pedal (Item #EE) and turn it over.
Put a Foot Pedal Pad (Item #18) in each of the
pad locations.
NOTICE:
The pads are recommended when using
the Foot Pedal on non-carpeted surfaces.
10 | minnkotamotors.com
#EE x 1
Sideplate Screw Sideplate Screw
Foot Pedal Foot Pedal
Bottom Bottom
Foot Pedal Foot Pedal
Pad Placement Pad Placement
©2021 Johnson Outdoors Marine Electronics, Inc.