Connection To The Power Supply - Grundfos MAGNA1 Instructions D'installation Et D'utilisation

5.2 Connection to the power supply

5.2.1 Models 32-XX
Step Action
Remove the front
1 cover from the
control box.
Locate the power
2 supply plug inside
the control box.
Connect the
conduit and feed
3 the power cable
through the
control box.
Strip the wires as
illustrated and
connect the
4
conductors to the
power supply
plug.
Illustration
L (L1)
N (L2)
0.28 in. (7 mm)
0.28 in. (7 mm)
1.0 in. (25 mm)
0.79 in. (20 mm)
Min.
0.28 in. (7 mm)
Max
Step Action
Insert the supply
plug into the
5
power receptacle
on the PCB.
Tighten the
6 conduit and refit
the front cover.
Illustration
13