Technical Data - Marmitek IR Control 10 Guide De L'utilisateur

8. TECHNICAL DATA

IR receiver
Frequency range:
IR reception range:
IR reception angle:
Cable length:
IR reception indication:
Status indication:
Receiver dimensions:
IR module
Power supply POWER:
Power supply STATUS:
IR input:
IR output:
Dimensions:
IR extension cable with 1 blaster LED
Connection:
IR LEDs:
Cable length:
IR extension cable with 2 emitter LEDs
Connection:
IR LEDs:
Cable length:
Specifications may change without prior notice.
IR CONTROL 10/11 XTRA™
30-60 KHz
± 10 meters
90º (+45º/-45º from centre)
3 meters, extendable up to 300 meters
YES, purple indication LED
YES, green indication LED
Surface mount: 40 x 13 x 11mm
Panel mount: 14 x 52mm, Ø 12mm (drill size)
100-240VAC 50/60Hz, 12VDC 200mA (supplied)
5-24VDC / 5-12VAC plug, - 5.5mm outside / +
2.1mm inside (not supplied)
1x 3.5mm jack connector, for standard IR
receiver
1x screw connector, for up to 6 in parallel
connected IR receivers. Extendable up to 300
meters using CAT5 (or equivalent)
4x 3.5mm jack plug (mono), switchable for IR
extension cables with emitter or blaster LEDs
95 x 46 x 20mm
3.5mm jack plug (mono)
1x IR blaster LED
3 meters
3.5mm jack plug (mono)
2x IR emitter LEDs
3 meters
11