Warranty Coverage; Maintenance Table - Stiga HT 900 Li 48 Manuel D'utilisation

Taille-haie portatif alimenté par batterie
Masquer les pouces Voir aussi pour HT 900 Li 48:
Table des Matières

Publicité

can be performed by the user. Any regulations
and maintenance operations not described
herein must be carried out by your Dealer
or Authorised Service Centre, which have
the necessary knowledge and equipment to
ensure that the work is carried out correctly,
maintaining the correct degree of safety and the
original operating conditions of the machine.
Any operations performed in unauthorised
centres or by unqualified persons will totally
invalidate the Warranty and all obligations
and responsibilities of the Manufacturer.
• Only Authorised Service Centres can carry
out guaranteed repairs and maintenance.
• The Authorised Service Centres only
use genuine spare parts. Genuine
spare parts and attachments have been
designed specifically for machines.
• Non-original parts and attachments are not
approved; use of non-original spare parts
and attachments will jeopardise the safety
of the machine and relieve the Manufacturer
from all obligations or liabilities.
• It is advisable to send your machine once a year
to an Authorised Service Centre for servicing,
assistance and safety device inspection.

13. MAINTENANCE TABLE

Intervention
MACHINE
Check the status of the connection
cable of the battery backpack.
Check all fasteners.
Safety checks/command check.
Check the battery charge status.
Recharge the battery.
Clean the machine and the engine.
Cleaning and lubrication of the cutting means.
Checking for any damage to the machine. If
necessary, contact the authorised service centre.
Check the cutting means.
Sharpening the cutting means.
Replacing the cutting means.
* Refer to the battery/battery charger manual.
** The operation must be carried out by your Dealer or an Authorised Service Centre.

12. WARRANTY COVERAGE

The warranty covers all material and manufacturing
defects. The user must follow all the instructions
provided in the accompanying documentation.
The warranty does not cover damage caused by:
• failure to become familiar with the
documentation accompanying the machine;
• carelessness;
• incorrect or forbidden use or assembly;
• use of non-genuine spare parts;
• use of attachments not supplied or not
approved by the manufacturer.
The warranty does not cover:
• normal wear and tear of consumables such
as wheels, blades, safety bolts and wires;
• normal wear and tear.
The purchaser is protected by his or her own
national legislation. The purchaser's rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
Frequency
Before each use.
Before each use.
Before each use.
Before each use.
After each use.
After each use.
After each use.
After each use.
After each use.
-
-
EN - 13
Notes
-
para. 7.5
para. 6.2
*
para. 7.2.2
*
para. 7.3
para. 7.4
-
para. 8.1.1
para. 8.1.2
**
para. 8.1.3
**

Publicité

Table des Matières
loading

Table des Matières