Faro MC01 B Mode D'emploi page 51

MC01 B / BL / G / GL - Instructions for use - EN
7.5.1 Care products and systems - Servicing: Care with Faro Spray
Faro recommends servicing the product after each time it is used, i.e. after each automatic cleaning and before each sterilisation.
 Remove cutter or grinder.
 Cover the product with a clean bag.
 Place the product on the cannula and press the spray button for one second.
Care of chucking system
Faro recommends cleaning and servicing the chuck system once a week.
 Remove the cutter or grinder, place the spray nipple tip in the openin gand spray.
 Carry out the servicing according to the instructions in the section,"Care with Faro Spray".
Care of chucking system
Faro recommends cleaning and servicing the chuck system once a week.
 Remove the cutter or grinder, place the spray nipple tip in the openin gand spray.
 Subsequently treat with the care products and care systems specified.
7.6 Packaging
The sterilisation bag must be large enough for the handpiece so that the bag is not stretched.
The quality and use of the sterilisation packaging must satisfy applicable standards and be suitable for the sterilisation procedure!
 Individually weld the medical device in the sterilised item packaging.
49