Removing The Drivepack From The E-Bike - FAZUA RIDE 50 TRAIL Notice Originale

Original instructions | US-English
3. Check that the DRIVEPACK is seated securely.
If the DRIVEPACK does not lock, pull it out again if necessary and attempt to
insert it again. Do not use the drive system if the DRIVEPACK on the e-bike
cannot be locked. In this case, contact an authorized specialist to have the
fault rectified.

16.2 Removing the DRIVEPACK from the e-bike

Risk of burns!
The cooling unit on the DRIVEPACK can become very hot during oper-
ation and you may burn yourself when touching it.
►Allow the DRIVEPACK to cool completely before touching the
DRIVEPACK.
If you press the DRIVEPACK firmly against the frame before releasing
the locking lever, the DRIVEPACK is more easy to release from the lock
on the frame during removal.
1. Hold the DRIVEPACK with one hand.
2. Move the locking lever [A.5] upwards with the other hand as far as possible to
release the DRIVEPACK from the lock.
A.5
WARNING
A.5
109